Gas-to-liquids – cutting oils and grinding oils for reduced wear and optimum process reliability.

Oemeta’s new cutting and grinding oils are based on the latest generation of oils. The so-called gas-to-liquid or “GTL” process is used to obtain very pure, synthetic base oils from natural gas. These are free of organic nitrogen, heavy metals, zinc and chlorine compounds. The process reliability of Oemeta’s GTL oils has been demonstrated based on various approvals issued by well-known customers in the automotive and supplier industry as well as machine manufacturers.


OEMETOL products for good occupational safety and low consumption.

Oemeta OEMETOL products have a very high flash point and a very low tendency to evaporate. This ensures good occupational safety and lower consumption. The higher lubrication performance and improved foaming properties of GTL oils compared to conventional mineral or hydrocracked oils reduce wear and improve process reliability.

The GTL process for pure, synthetic base oils.

The GTL process involves mixing natural gas and oxygen to form syngas. This is combined by means of a Fischer-Tropsch synthesis to form long-chained paraffin waxes. In the next step – the hydrocracking process – the long-chained paraffin waxes are converted into liquid hydrocarbons (saturated short-chained paraffins) by means of cracking, isomerisation and subsequent fractionation.

Advantages of GTL oils at a glance

  • Neutral odour
  • Very low evaporation loss
  • Low-foaming, outstanding air separation characteristics
  • Improved filterability and greater economic efficiency due to low density
  • Not cytotoxic (EN ISO 10993-5:2009)
  • Outstanding lubricating performance due to selected EP and AW additives

GTL oils compared to conventional hydrocracked oils:

Faster air separation
by up to +45 %

Result: higher cooling effect

Very high flash point,
up to +17 %

Result: good occupational health and safety

 

 

Lower evaporation*
by up to -60 %

Result: lower consumption, less odour, less misting
*Noack-Test

Less wear*
by up to -20 %

Result: longer tool life
*Reichert-Test

Cytotoxicity

Our GTL oils are not cytotoxic according to EN ISO 10993-5:2009. An essential prerequisite for the use of implants in the medical sector is good biocompatibility. For this reason, both bio-compatible materials and processing fluids are ideally used.

In order to assess biocompatibility, the in vitro cytotoxicity test is carried out according to ISO 10993-5. Here, the influence of the processing fluid on the viability of body cells is determined. Up to a cell viability of more than 70%, the processing fluid is classified as non-cytotoxic.

During the procedure, a 25 cm² stainless steel plate is first immersed in the processing fluid. The liquid then drips off for one hour and the platelet is placed in a defined cell solution for 48 hours after sterilisation. The viability of the body’s cells is finally established by means of microscopic counting and analysis of metabolic activity.

In order to optimise quality in the manufacture of products for medical use, we recommend the use of non-cytotoxic cooling lubricants, tested according to ISO 10993-5.


If you have individual enquiries or requests for information regarding our products and support, you can reach our team at: infouk@oemeta.com.

All cutting and grinding oils

With our product finder you can select the desired parameters and immediately receive the right solution.

Reset Product Finder
0 products found

HYCUT SW 220

Neat Cutting and Grinding Oils
HYCUT SW 32, 68 and 220 are high performance machining oils based on synthetic ester oils, recommended for the usage as slideway oils. The product range features excellent lubricating and wetting action as well as outstanding adhesive power.
https://www.oemeta.com/uk/products-services/product/hycut-sw-220
Compatible materials:
Applications:
Learn more

HYCUT SW 32

Neat Cutting and Grinding Oils
HYCUT SW 32, 68 and 220 are high performance machining oils based on synthetic ester oils, recommended for the usage as slideway oils. The product range features excellent lubricating and wetting action as well as outstanding adhesive power.
https://www.oemeta.com/uk/products-services/product/hycut-sw-32
Compatible materials:
Applications:
Learn more

HYCUT SW 68

Neat Cutting and Grinding Oils
HYCUT SW 32, 68 and 220 are high performance machining oils based on synthetic ester oils, recommended for the usage as slideway oils. The product range features excellent lubricating and wetting action as well as outstanding adhesive power.
https://www.oemeta.com/uk/products-services/product/hycut-sw-68
Compatible materials:
Applications:
Learn more

HYTAP

Neat Cutting and Grinding Oils
HYTAP is a high performance tapping and drilling oil for demanding machining processes. The product is suitable for all materials and applications.
https://www.oemeta.com/uk/products-services/product/hytap
Compatible materials:
Aluminium
Grey Cast Iron
Non-ferrous metals
Stainless Steel
Steel
Titanium
Applications:
Drilling
Turning
Milling
Tapping
Learn more

OEMETOL 546

Neat Cutting and Grinding Oils
OEMETOL 546 is a high performance machining oil based on synthetic ester oils. The product is suitable for the machining and forming processes of demanding materials. Outstanding lubricating performance due to selected EP-additives ensures minimum tool wear.
https://www.oemeta.com/uk/products-services/product/oemetol-546
Compatible materials:
Aluminium
Grey Cast Iron
Non-ferrous metals
Stainless Steel
Steel
Titanium
Applications:
Honing
Grinding
Learn more

OEMETOL 610 GT

Neat Cutting and Grinding Oils
OEMETOL 610 GT is a high performance neat cutting oil of the latest generation, based on GTL- oils. In the “Gas-to-Liquids” process synthetic base oil is produced from nature gas, oxygen and steam. The product is characterised by his particularly high flashpoint and very low evaporation loss and is recommended for all standard machining processes.
https://www.oemeta.com/uk/products-services/product/oemetol-610-gt
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Grinding
Learn more

OEMETOL 615 GT

Neat Cutting and Grinding Oils
OEMETOL 615 GT is a high performance cutting oil of the latest generation, based on GTL- oils. In the “Gas-to-Liquids” process synthetic base oil is produced from nature gas, oxygen and steam. The product is characterised by his particularly high flashpoint, extreme low evaporation loss and is recommended for standard and demanding machining processes.
https://www.oemeta.com/uk/products-services/product/oemetol-615-gt
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Learn more

OEMETOL 620 GT

Neat Cutting and Grinding Oils
OEMETOL 620 GT is a high performance cutting oil of the latest generation, based on GTL- oils. In the “Gas-to-Liquids” process synthetic base oil is produced from nature gas, oxygen and steam. The product is characterised by his particularly high flashpoint and extreme low evaporation loss and is recommended for all standard machining processes till easy deep drilling operations.
https://www.oemeta.com/uk/products-services/product/oemetol-620-gt
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Learn more

OEMETOL 620 HC

Neat Cutting and Grinding Oils
OEMETOL 620 HC is a high performance straight oil, based on modern hydrocrack oils. The product is designed for all standard machining processes. Outstanding lubricating performance due to selected AW- and EP-additives ensures minimum tool wear.
https://www.oemeta.com/uk/products-services/product/oemetol-620-hc
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Steel
Applications:
Drilling
Turning
Milling
Tapping
Learn more

OEMETOL 640 AS

Neat Cutting and Grinding Oils
OEMETOL 640 AS is a high performance straight oil, based on modern hydrocrack oils. The product can be utilized for metal cutting of hard-to-machine materials as well as profile grinding processes (tooth flank grinding with CBN grinding wheel on Kapp and Reishauer-grinding machines).
https://www.oemeta.com/uk/products-services/product/oemetol-640-as
Compatible materials:
Aluminium
Grey Cast Iron
Stainless Steel
Applications:
Grinding
Learn more

OEMETOL HS 12

Neat Cutting and Grinding Oils
OEMETOL HS 12 is a high performance machining oil based on synthetic ester oils. The product contains special AW- and EP-additives for enhanced tool life in heavy duty machining.
https://www.oemeta.com/uk/products-services/product/oemetol-hs-12
Compatible materials:
Grey Cast Iron
Stainless Steel
Steel
Applications:
Grinding
Learn more

How can we help you?

If you’re interested in our products and services or have any questions or suggestions, please don’t hesitate to contact us.

Oemeta (UK) Limited

Bramley House
39 Main Road
Middleton Cheney
Oxfordshire
OX17 2ND
United Kingdom